Journal on Today's Ideas - Tomorrow's Technologies

B. Lavanya1 , T. Madhumitha2  1,2Department of Computer Science, University of Madras, Chennai, India 1* Email: lavanmu@gmail.com Abstract:  Motifs and ontology are used in medical database for identifyingand diagnose of the disease. A motif is a pattern network used for analysis of the disease. It also identifies the pattern of the signal. Based on the motifs the disease can be predicted, classified and diagnosed. Ontology is knowledge based representation, and it is used as a user interface to diagnose the disease. Ontology is also used by medical expert to diagnose and analyse the disease easily. Gene ontology is used to express the gene of the disease. Research Paper Link:  http://dspace.chitkara.edu.in/jspui/bitstream/123456789/771/3/3-%20A%20Survey%20on%20Identification%20of%20Motifs%20and%20Ontology%20in%20Medical%20Database%20-%20B.%20Lavany.pdf DOI: https://doi.org/10.15415/jotitt.2018.61003

Akanksha Upadhyaya1 , Bhajneet Kaur2  1,2Rukmini Devi Institute of Advanced Studies, Delhi, India. 1* Email: akanksha.bhardwaj@rdias.ac.in Abstract: The aim of this research paper is to explore the Electronic payment system (EPS) acceptability determinants, from the consumer perspective. Exploratory factor analysis has been used to explore the factors based on different statements. The study has been conducted in North-West region of Delhi. Data has been collected from male-female of different age groups by using the questionnaire tool of data collection. For extraction of factors Principal component analyses and Varimax with Kaiser Normalization rotation method was used. The rotated component matrix shows best fitting of items to form a factor. As per the convergence of items, 4 factors were extracted and named. These factors are security concern, Knowledge, awareness and acceptability & convenience which are contributing for acceptability of electronic payment system ...

Pinak Ray1*, Subham Roy2  1 Jadavpur University, Kolkata, India 2 University of Engineering and Management, Kolkata, India 1* Email: pinak.ray@uem.edu.in Abstract: From humble cottages to super tall structures, human beings have progressively developed the living and working space with time. This paper describes the origin and growth of modern skyscrapers, the subsequent challenges faced, and the way it was outdone. Research papers and case studies have been thoroughly studied and important excerpts from them have been explained to show how the modern structures have been evolved. The sources and causes of evolution is debatable among researchers, this paper has taken into account 7 most vital milestones in the growth of current generation skyscrapers and their contribution to the construction industry and concludes with the ideas and scopes where growth is still possible and challenges need to be solved. Research Paper Link:  http://dspace.chitkara.edu.in/jspui/bi...

Simranjeet Singh1 , Dushayant Singh Yadav2 1 Chandigarh University, Gharuan, Chandigarh, India 2 Junior engineer, Border road organization, India Email: Simranjit.cu@gmail.com, dushayant53@gmail.com Abstract: For the last few years, rebel activities in addition to related intimidation have been a rising concern throughout the world which not only impacts the human life but also leads to loss of property, both structural impacts and its corporeal integrity. Special prominence has also been agreed to nuisance such as explosion and seismic activity. Different STAAD models generated were analyzed, the results of analysis have been discussed in this section. It contains different amount of TNT and varying standoff distance. Each case has its own maximum and minimum displacement which was found by using STAAD Pro V8i. Two different framed structures were used. In one of the cases, we used simple concrete bare frame having only beams and columns, whereas in the other case we used con...

R. Q. A. Fernandes1, W. A. Pinheiro1,2,3, G. B. Xexéo3, J. M. de Souza3  1 Centro de Desenvolvimento de Sistemas, SMU, Brasília, DF, CEP, Brazil 2 Instituto Militar de Engenharia, Praia Vermelha, Urca, Rio de Janeiro, RJ, CEP, Brazil 3 COPPE/UFRJ, Universidade Federal do Rio de Janeiro, RJ, PO Box 68.501, Brazil E-mail: ricardo@cds.eb.mil.br, awallace@cos.ufrj.br, xexeo@cos.ufrj.br, jano@cos.ufrj.br Abstract: This work proposes an algorithm that uses paths based on tile segmentation to build complex clusters. After allocating data items (points) to geometric shapes in tile format, the complexity of our algorithm is related to the number of tiles instead of the number of points. The main novelty is the way our algorithm goes through the grids, saving time and providing good results. It does not demand any configuration parameters from users, making easier to use than other strategies. Besides, the algorithm does not create overlapping clusters, which simplifies the interpr...

Badhan Saha1 , Mazharul Islam2 , Abu Torab, Dewan Hasan Ahmed3  123Ahsanullah University of Science and Technology, Dhaka Bangladesh E-mail: dhahmed.mpe@aust.edu Abstract: Wave energy is the most available energy associated in deep water seas and oceans. Therefore, many attempts have been applied to capture these energies. This paper describes the design, construction and testing of water wave flume. The water wave flume contains an electromechanically driven rotor type wave maker to generate water wave powers. The waves are constructed by different sizes and arrangements of blades which are connected to the rotor. The rotor is driven by an ac motor to generate wave. At the end of the tank a force measuring device is attached opposite to the rotor to measure the thrust of the wave. Experimental results are validated with available literature and wave theory. The results also show that the width of the blade play major role in generating wave sizes including frequency, ampli...

Neeru Singla1 , Mandeep Kumar2  12IGKPTU, Jalandhar, Punjab, India E-mail: neeru_024@yahoo.com Abstract: Construction industry relies heavily on conventional material such as cement, sand and gravel for the production of concrete The river sand and gravels which are most commonly used as fine aggregates and coarse aggregates respectively in the production of concrete, poses the problem of acute shortage in many areas, whose continued use has started posing serious problem with respect to its availability, cost and environmental impact. Attempt is being made in this project to use the locally available waste materials to replace the river sand and gravels to produce light weight and low cost concrete. Sawdust and Brick ballast are easily affordable at low costs, which are partially replaces with river sand and gravels respectively for making concrete. Natural sand and Gravels have been partially replaced (4% SD 8% BB, 4% SD 16% BB, 4% SD 24% BB, 8% SD 8% BB, 8% SD 16% BB, 8%...