Effect of Different Curing Conditions on Geopolymer Concrete by Partially Replacing sand with Foundry sand

REKHA DEVI , S. K. SHARMA AND HIMMI GUPTA
M. E. (CTM), Civil Engineering, NITTTR, Chandigarh, India
Professor,  Assistent Professor, Civil engineering Department, NITTTR, Chandigarh, India


 Email: sanjaysharmanitttr@gmail.com


Abstract: In the present paper, fly ash (no other solid material was used) with highly alkaline solutions is described. These solutions, made with NaOH, Na2Sio3.This paper, report on the study of the processing of geopolymer using fly ash and alkaline activator with geopolymerization process. The factors that influence flexural strength such as different curing condition. The fly ash, fine aggregate with replacement of foundry sand, coarse aggregats and alkaline solution were is used to make geopolymer concrete. The foundry sand is replaced by normal sand in different amount. The main purpose of replacement of foundry sand in to utilize waste by product and save environment also to see the effect on proprety of geopolymer concrete. The flexural strength is carriedout by UT machine at 7 and 28 days.


DOI: 10.15415/jotitt.2015.32008


LINK: http://dspace.chitkara.edu.in/jspui/bitstream/1/696/1/001_JOTITT_S%20K%20Sharma.pdf


Comments

Post a Comment

Popular posts from this blog

Manpower Planning, Scheduling and Tracking of a Construction Project Using Microsoft Project Software

Image
ABHISHEK SHARMA AND K.K. PATHAK  National Institute of Technical Teachers’ Training and Research, Bhopal (M.P.), India Email: abhishek08887@gmail.com Abstract: Many project suffers time and cost overruns due to improper planning, scheduling and execution works that results in several issues like delay in providing facilities, development, reduction in quality of construction and making the project more expensive. A little consideration shows that the time required to complete the project is inversely proportional to the supply of manpower. As the manpower is increased, the completion time of the project is decreased and on the other hand if the manpower is decreased, the completion time of the project is increased. The present study deals with the manpower planning, scheduling and tracking of “Construction of a Residential Block at Mahadev Parisar, Bhopal”, a six storied (G+6) building project whose construction is in progress at Shivaji Nagar, Bhopal, Madhya Pradesh. A c...
Read more

Analysis of Student’s Data using Rapid Miner

Image
SHEENA ANGRA, SACHIN AHUJA  Ph.D Scholar, Chitkara University, India Associate Director, CURIN, Chitkara University, India E-mail: sheena.angra@chitkara.edu.in, sachin.ahuja@chitkara.edu.in Abstract: Data mining offers a new advance to data analysis using techniques based on machine learning, together with the conventional methods collectively known as educational data mining (EDM). Educational Data Mining has turned up as an interesting and useful research area for finding methods to improve quality of education and to identify various patterns in educational settings. It is useful in extracting information of students, teachers, courses, administrators from educational institutes such as schools/ colleges/universities and helps to suggest interesting learning experiences to various stakeholders. This paper focuses on the applications of data mining in the field of education and implementation of three widely used data mining techniques using Rapid Miner on the data coll...
Read more

Review of Modeling and Simulation Technologies Application to Wind Turbines Drive Train

Image
M Sh saleh* , A A El-Betar, A M El-Assal  Mechanical Engineering Department, Benha Faculty of Engineering, Benha University AL Qalyubiya, Egypt *Email: Mohamed.saleh@bhit.bu.edu.eg Abstract: In this paper, a review of past and recent developments in the wind turbine drive train is being studied. The objective is to review some of the basic approaches of drive train configuration in wind turbines and to identify drive train models including the modeling and simulation results of these models. In recent years, considerable effort has been devoted to modeling, design, and control of wind turbine including drive train .The number of publications on computational strategies (multibody dynamics) are widely used for design and simulation of wind turbines components has been steadily increasing. Lists and reviews many contributes of design and simulation method are given in survey papers [1], [2]. DOI: 10.15415/jotitt.2014.22009 LINK:   http://dspace.chitkara.edu.in/jspui/b...
Read more