Development of Fly Ash based Geopolymer behaviour of Fly Cement

P.Yellaiah1 , Sanjay Kumar Sharma1, *, T.D. Gunneshwara Rao2

1 Research Scholar in Civil Engineering, Department, NITTTR, Chandigarh. 2 Associate Professor, Civil Engineering Department, National Institute of Technology, Warangal (A.P), India

*E-mail: sanjaysharmanitttr@gmail.com

Abstract: Geopolymer is a novel binding material produced from the reaction of fly ash with an alkaline activator liquid; ensure durability and environmental sustainability and is emerging greener alternative to Ordinary Portland cement in the construction field. In this research, the influence of various parameters on the consistency and setting times of low-calcium fly ash-based geopolymer cement under varied heat curing temperature were investigated. Systematic trials were carried to optimise the normal consistency and setting times over a number of parameters. The consistency of the geopolymer cement does not show any variation when mixed with different combinations of alkaline activator solution; whereas the setting times were observed to be dependent on the concentration of NaOH solution, ratio of alkaline activator liquid and variation in temperature. The test results revealed that the normal consistency of the fly ash-based geopolymer paste is found to be at 28% of alkaline activator solution for all the selected mixtures. Wherein, increase in concentration of NaOH solution increases setting times; increase in alkaline liquid ratio decreases setting times up to certain limits viz; increase in alkaline liquid ratio from 1.5 to 2.0, decreases setting times; further increase in alkaline liquid ratio from 2.0 to 2.5, increases setting times. The setting times were observed as decreased when the alkaline liquid ratio increased from to 2.5 to 3.0.


DOI: 10.15415/jotitt.2014.21003

LINK: http://dspace.chitkara.edu.in/jspui/bitstream/1/502/4/21003_JOTITT_Yellaiah.pdf






Comments

Post a Comment

Popular posts from this blog

Manpower Planning, Scheduling and Tracking of a Construction Project Using Microsoft Project Software

Image
ABHISHEK SHARMA AND K.K. PATHAK  National Institute of Technical Teachers’ Training and Research, Bhopal (M.P.), India Email: abhishek08887@gmail.com Abstract: Many project suffers time and cost overruns due to improper planning, scheduling and execution works that results in several issues like delay in providing facilities, development, reduction in quality of construction and making the project more expensive. A little consideration shows that the time required to complete the project is inversely proportional to the supply of manpower. As the manpower is increased, the completion time of the project is decreased and on the other hand if the manpower is decreased, the completion time of the project is increased. The present study deals with the manpower planning, scheduling and tracking of “Construction of a Residential Block at Mahadev Parisar, Bhopal”, a six storied (G+6) building project whose construction is in progress at Shivaji Nagar, Bhopal, Madhya Pradesh. A compa
Read more

Analysis of Student’s Data using Rapid Miner

Image
SHEENA ANGRA, SACHIN AHUJA  Ph.D Scholar, Chitkara University, India Associate Director, CURIN, Chitkara University, India E-mail: sheena.angra@chitkara.edu.in, sachin.ahuja@chitkara.edu.in Abstract: Data mining offers a new advance to data analysis using techniques based on machine learning, together with the conventional methods collectively known as educational data mining (EDM). Educational Data Mining has turned up as an interesting and useful research area for finding methods to improve quality of education and to identify various patterns in educational settings. It is useful in extracting information of students, teachers, courses, administrators from educational institutes such as schools/ colleges/universities and helps to suggest interesting learning experiences to various stakeholders. This paper focuses on the applications of data mining in the field of education and implementation of three widely used data mining techniques using Rapid Miner on the data collecte
Read more

Application of Silica Fume and Nanosilica in Cement and Concrete – A Review

Image
Sakshi Gupta  Assistant Professor, Civil Engineering Department, Dronacharya College of Engineering, Gurgaon, Haryana, India Email: ersakshigupta18@gmail.com Abstract: This paper reviews the recent developments and present state of the application of silica fume (micro-silica) and nano-silica for sustainable development of concrete industry. This would save not only the natural resources and energy but also protect the environment with the reduction of waste material. Limited work is done on use of nano-silica and microsilica in paste, mortar and concrete and whatever work is available is highly contradictory about their influence on mechanical strength development and durability properties. Various literatures have been reviewed to understand the influence of micro and nano-silica on fresh, hardened and microstructural properties of paste, cement mortar and concrete. Taking advantage of nanostructure and microstructure characterization tools and materials, the simultaneous and
Read more